Operation Manual

Customizing Standard Features
Configuring Phone Information and Display Settings
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 49
3
Customizing the Startup Screen
You can create a text or 128-by-48 pixel by 1-bit deep image logo to display when
the IP phone boots up. (Not applicable to Cisco WIP310 or the Cisco SPA501G.) A
logo displays during the boot sequence for a short period after the Cisco logo
displays.
To configure a custom logo:
STEP 1 For the Cisco SPA303 and Cisco SPA5XXG, click Admin Login > advanced >
Voice > Phone.
For the Cisco SPA525G or Cisco SPA525G2, click Admin Login > advanced >
Voice > User.
STEP 2 To display a text logo, in the Text Logo field enter text as follows:
• Up to two lines of text
• Each line must be less than 32 characters
• Insert a new line character (\n) and escape code (%0a) between the two
lines
For example, Super\n%0aTelecom displays:
Super
Telecom
• Use the + character to add spaces for formatting. You can add multiple +
characters before and after the text to center it.
STEP 3 To display a picture logo:
a. In the BMP Picture Download URL field, enter the path, for example:
http://192.168.2.244/pictures/image04_128x48.bmp
(you can also use a TFTP server)
b. Change Select Logo to BMP Picture.
STEP 4 Click Submit All Changes. The phone reboots, retrieves the .bmp file, and displays
the picture when it next boots.
Downloaded from www.Manualslib.com manuals search engine