Operation Manual

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 Series)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 317
A
For more information, see Chapter 9, “Configuring the Cisco Attendant
Console.”.
Test Mode Enable Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back
to off. In test mode, when all the buttons on the
Cisco SPA500S are returned to off, all the keys
become orange. The IP phone must be rebooted
after the test is completed.
Attendant Console Call
Pickup Code
The star code used for picking up a ringing call.
Defaults to *98.
BLF List URI Automatically configures Busy Lamp Field (BLF)
subscriptions for all users on a monitored list. See
Configuring BroadSoft Busy Lamp Field Auto-
Configuration.
Unit 1 Key 1-32 Enter a strings that define the extension and other
parameters associated with each lighted button
on the first Cisco Attendant Console. Keywords
and values are case-sensitive. The configuration
script is described in the Unit/Key Configuration
Scripts.
Call Pickup Audio
Notification
By default, this parameter is set to no. If you set it
to yes, the phone plays the Call Pickup tone when
there are incoming calls to any of the lines that the
user is monitoring with the Call Pickup function.
Use the following in your configuration file:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
Parameter Description
Downloaded from www.Manualslib.com manuals search engine