Operation Manual

Cisco SPA IP Phone Field Reference
User Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 314
A
Screen (Cisco SPA525G or Cisco SPA525G2)
Handset Volume Sets the default volume for the handset.
Headset Volume Sets the default volume for the headset.
Bluetooth Volume Volume of the Bluetooth device.
NOTE Applies to the Cisco SPA525G or Cisco SPA525G2
only.
Parameter Description
Screen Saver Enable Enables a screen saver on the IP phone screen. When
the phone is idle for a specified time, it enters screen
saver mode. (Users can set up screen savers directly
using phone Setup button.) Any button press or on/off
hook event triggers the phone to return to its normal
mode. (The screen shows “Press any key to unlock
your phone.”) If a user password is set, the user must
enter it to exit screen saver mode.
Screen Saver Type Choose the type of screen saver:
• Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles
from black to gray.
• Picture Rotation—The screen rotates through available
pictures on the phone.
• Digital Frame—Shows the background picture.
Screen Saver Trigger
Time
Number of seconds that the phone remains idle before
the screen saver turns on.
Screen Saver Refresh
Time
Number of seconds before the screen saver should
refresh (if, for example, you chose a rotation of
pictures).
Downloaded from www.Manualslib.com manuals search engine