Operation Manual

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 281
A
In addition to these two ring tones, four user-configurable ring tones were added:
These four ring tones must be provisioned or configured by using the phone web
user interface.
Ring Tone (Cisco WIP310)
Label Value of the w Parameter
Warble (Cisco SPA300 Series and Cisco SPA500 Series)
w=7
((Cisco SPA525G or Cisco SPA525G2))
w=file://Warble.raw
Low (Cisco SPA300 Series and Cisco SPA500 Series)
w=8
((Cisco SPA525G or Cisco SPA525G2))
w=file://Low.raw
Floor (Cisco SPA300 Series and Cisco SPA500 Series)
w=9
((Cisco SPA525G or Cisco SPA525G2))
w=file://Floor.raw
Reverb (Cisco SPA300 Series and Cisco SPA500 Series)
w=10
((Cisco SPA525G or Cisco SPA525G2))
w=file://Reverb.raw
Parameter Description
Keypad Tone Select yes to enable the keypad tone to be
played when a key on the keypad is pressed.
Select no to silence the keypad.
Keypad Tone Volume Corresponds to the volume of the keypad tone.
Default is 5.
Downloaded from www.Manualslib.com manuals search engine