Operation Manual

Cisco SPA IP Phone Field Reference

Regional Tab

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 252

Distinctive Ring Patterns

Secure Call Indication Tone Played when a call has been successfully

switched to secure mode. It should be played only

for a short while (less than 30 seconds) and at a

reduced level (less than -19 dBm) so it does not

interfere with the conversation.

Defaults to 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/

2.1/2).

Page Tone Specifies the tone transmitted when the paging

feature is enabled.

Defaults to 600@-16;.3(.05/0.05/1).

Alert Tone Played when an alert occurs.

Defaults to 600@-19;.2(.05/0.05/1).

System Beep Audible notification tone played when a system

error occurs.

Defaults to 600@-16;.1(.05/0.05/1).

NOTE Applies to Cisco SPA525G or

Cisco SPA525G2

or Cisco WIP310 only.

Parameter Description

Cadence 1 Cadence script for distinctive ring 1.

Defaults to 60(2/4).

Cadence 2 Cadence script for distinctive ring 2.

Defaults to 60(.3/.2, 1/.2,.3/4).

Cadence 3 Cadence script for distinctive ring 3.

Defaults to 60(.8/.4,.8/4).

Downloaded from www.Manualslib.com manuals search engine