Operation Manual

Cisco SPA IP Phone Field Reference

Regional Tab

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 249

Reorder Tone Played when an outbound call has failed or after

the far end hangs up during an established call.

Reorder Tone is played automatically when <Dial

Tone> or any of its alternatives times out.

Defaults to 480@-19,620@-19;10(.25/.25/1+2).

Off Hook Warning Tone Played when the caller has not properly placed

the handset on the cradle. Off Hook Warning Tone

is played when Reorder Tone times out.

Defaults to 480@10,620@0;10(.125/.125/1+2).

Ring Back Tone Played during an outbound call when the far end

is ringing.

Defaults to 440@-19,480@-19;*(2/4/1+2).

Call Waiting Tone Played when a call is waiting. Defaults to

440@-10;30(.3/9.7/1)

Call Pickup Tone The default value for this parameter is

440@-10;30(.3/9.7/1), which is the same as the call

waiting tone.

This feature appears as follows in the phone

configuration file:

<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/

1)</Call_Pickup_Tone>

Confirm Tone Brief tone to notify the user that the last input

value has been accepted.

Defaults to 600@-16; 1(.25/.25/1).

SIT1 Tone Alternative to the Reorder Tone played when an

error occurs as a caller makes an outbound call.

The RSC to trigger this tone is configurable on

theIP phone screen.

Defaults to 985@-16,1428@-16,1777@-16;20(.380/

0/1,.380/0/2,.380/0/3,0/4/0).

Parameter Description

Downloaded from www.Manualslib.com manuals search engine