Operation Manual

Configuring LED Patterns
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 207
9
Remote Seized LED
(applicable only to
shared call
appearance)
The shared call appearance was seized by another
phone.
Defaults to blank (c=r; p=d).
Local Progressing
LED
This phone attempts an outgoing call on this call
appearance (the called number is ringing).
Defaults to blank (c=r).
Remote
Progressing LED
(applicable only to
shared call
appearance)
Another phone attempts an outbound call on this shared
call appearance.
Defaults to blank (c=r; p=d).
Local Ringing LED The call appearance is ringing.
Defaults to blank (c=r;p=f).
Remote Ringing
LED (applicable
only to shared call
appearance)
The shared call appearance is in ringing on another
phone.
Defaults to blank (c=r;p=d).
Local Active LED The call appearance is engaged in an active call.
Defaults to blank (c=r).
Remote Active LED
(applicable only to
shared call
appearance)
Another phone is engaged in an active call on this shared
call appearance.
Defaults to blank (c=r;p=d).
Local Held LED The call appearance is held by this phone.
Defaults to blank (c=r;p=s).
Remote Held LED
(applicable only to
shared call
appearance)
Another phone placed this call appearance on hold.
Defaults to blank (c=r,p=s).
Register Failed LED The corresponding extension has failed to register with
the proxy server. Leaving this entry blank defaults to c=a.
Parameters Description
Downloaded from www.Manualslib.com manuals search engine