Operation Manual

9
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 206
Configuring LED Patterns
You can customize the LED patterns for the line keys.
To configure Line Key LED patterns:
STEP 1 Click Admin Login > advanced > Voice > Phone
STEP 2 Under Line Key LED Pattern, use the following letters to customize the fields
shown in the following table:
• p indicates pattern: the blinking pattern of the LED
• c indicates color: the color setting of the LED
• r indicates red: a red-colored LED
• g indicates green: a green-colored LED
Parameters Description
Idle LED The line is idle.
Defaults to blank (c=r).
Remote Undefined
LED
The Remote Undefined state pattern, where the shared
call state is undefined (the phone is still waiting for the
state information from the application server). Not
applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value of c=r;p=d.
Local Seized LED This phone seized the call appearance in preparation for
a new outbound call.
Defaults to blank (c=r).
Downloaded from www.Manualslib.com manuals search engine