Operation Manual

Provisioning
Using TR-069
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 170
6
ACS URL Enter the URL of the ACS using the CPE WAN Management
Protocol. This parameter must be in the form of a valid HTTP
or HTTPS URL. The host portion of this URL is used by the
CPE to validate the ACS certificate when using SSL or TLS.
ACS Username Enter the username that authenticates the CPE to the ACS
by using the CPE WAN Management Protocol. This
username is used only for HTTP-based authentication of the
CPE.
ACS Password Enter the password grants access to the ACS for this user.
This password is used only for HTTP-based authentication
of the CPE.
ACS URL In Use Displays the ACS URL.
Connection
Request URL
Displays the ACS making the connection request to the
CPE.
Connection
Request
Username
Enter the username that authenticates the ACS making the
connection request to the CPE.
Connection
Request
Password
Enter the password used to authenticate the ACS making a
connection request to the CPE.
Periodic Inform
Interval
The duration in seconds of the interval between CPE
attempts to connect to the ACS when Periodic Inform
Enable is set to yes.
Periodic Inform
Enable
From the drop-down menu, select yes to enable CPE
connection requests. Enter no to disable connection
requests.
TR-069
Traceability
From the drop-down menu, select yes to enable TR-069
transaction traceability. Enter no to disable traceability.
CWMP V1.2
Support
From the drop-down menu, select yes to enable CPE WAN
Management Protocol (CWMP) support. Enter no to disable
CWMP support such that the device does not send any
Inform messages to the ACS or accept any connection
requests from the ACS.
Field Description
Downloaded from www.Manualslib.com manuals search engine