Operation Manual

Getting Started

Updating Firmware

Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide 15

Updating Firmware

Phones should be updated to the latest firmware before using any administration

features. There are several ways to update your firmware:

SIP Phones

• Cisco SPA9000 Voice System Setup Wizard—If you are using the

Cisco SPA IP phones with a Cisco SPA9000 Voice System, see the

Cisco SPA9000 Voice System Setup Wizard User Guide for instructions.

(The Setup Wizard does not support Cisco SPA300 Series IP phones; you

must use a different process to upgrade that firmware.)

• Autoprovisioning—A configuration file that includes firmware upgrade

information is downloaded by a phone when it is powered on or configured

to do so. The configuration file (also referred to as a profile) includes

parameters that direct how and when the phone firmware is to be updated.

See the “Updating Profiles and Firmware” section on page 161 for more

information.

Cisco SPA300 Series, Cisco SPA500 Series, and Cisco WIP310 Executable

• Firmware Update Executable File—Download the firmware update utility

from the related product page on Cisco.com to your PC. Run the update by

double-clicking the executable file. Your computer must be on the same

subnetwork as the Cisco SPA IP phones.

Cisco SPA525G and Cisco SPA525G2

• Configuration Utility—You can download the latest phone firmware

configuration utility from Cisco.com onto your PC and use that utility to

upgrade your firmware.

Cisco WIP310

• TFTP or HTTP server—The latest firmware image file is loaded onto an

HTTP/TFTP server and is accessed by a web browser. See the

Cisco

WIP310 User Guide

for more information.

Downloaded from www.Manualslib.com manuals search engine