User guide

Send documentation comments to [e-mail]
C-2
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix C Cable and Port Specifications
Accessory Kit for the Cisco Nexus 5020 Switch
Accessory Kit for the Cisco Nexus 5020 Switch
This section describes the accessory kit contents for the Cisco Nexus 5020 switch and describes how to
attach a power cord to the switch.
The Cisco Nexus 5020 switch accessory kit includes the following items:
• 2 slider rails
• 2 rack-mount guides
• 2 rack-mount brackets
• 16 M4 x 0.7 x 8-mm Phillips countersunk screws
• 12 10-32 rack nuts
• 12 10-32 x 3/4-inch Phillips countersunk screws
• 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
• 1 ground lug kit
• 1 ESD wrist strap
• 2 power cord clips (a wire clip that is used to retain the power cord). Figure C-1shows how to attach
a power cord to the switch.
Figure C-1 Attaching the power cord clip to the Cisco Nexus 5020 switch
Note Additional parts can be ordered from your customer service representative.
Accessory Kit for the Cisco Nexus 5010 Switch
This section describes the accessory kit contents for the Cisco Nexus 5010 switch and describes how to
attach a power cord to the switch.
The Cisco Nexus 5010 switch accessory kit includes the following items:
• 2 slider rails
• 2 rack-mount guides
• 2 rack-mount brackets
236718