Installation guide

4-54 Cisco 4000 Series Installation Guide
Network Connection Considerations
An Ethernet transceiver cable with thumbscrew connectors can be connected directly to the
router port by replacing the slide latch with a jackscrew (provided in a separate bag). A
10BaseT transition cable can connect directly from the router to your network. (See
Figure 4-6.)
Figure 4-6 Single-Port Ethernet Network Processor Module 10BaseT Port
Connection
Figure 4-7 shows a single-port Ethernet network processor module with an Ethernet (AUI)
connection to a transceiver.
H1524a
10BaseT hub
10BaseT cable
AUI
10BASET
AUX
Router
(rear view)
Ethernet module