Installation guide

Making External Connections to Cisco 4000 Series Routers 4-53
Network Connection Considerations
The following is an example of configuring the Ethernet 0 interface for a media type AUI
connection:
router> enable
Password:
router# configure terminal
Enter configuration commands, one per line.
Edit with DELETE, CTRL/W, and CTRL/U; end with CTRL/Z
interface ethernet 0
media-type aui
^z
router# write memory
Figure 4-5 Ethernet Network Processor Module with AUI and 10BaseT
Connectors
Refer to the Cisco IOS configuration guides and command references for more information
on the media-type command.
LEDs10BaseT port AUI port
H1043a
Alignment
groove
Alignment
groove
Ethernet
AUI
10BaseT
TX RX LNK POL AUI