Installation guide

C-8 Cisco 4000 Series Installation Guide
Replacing Main Memory SIMMs
Figure C-5 Installing Main Memory SIMMs
2. Push the SIMM down and back.
1. Insert the SIMM into the socket at an angle 45° from vertical.
The socket guide posts insert
through the SIMM holes
(on both sides).
3.
The locking spring will
clip the back of the SIMM
when it is fully installed
(on both sides).
4.
H1152
Top view
Front of the chassis
Polarization
notch
1. Insert the SIMM into the socket at an angle 45° from vertical.
The socket guide posts insert
through the SIMM holes
(on both sides).
3.
The locking spring will
clip the back of the SIMM
when it is fully installed
(on both sides).
4.
Side view
2. Push the SIMM down and back.