Installation guide

A-10 Cisco 4000 Series Installation Guide
Serial Cables
EIA/TIA232 Octal Serial Cable Assembly
Figure A-3 shows the compact octal cable used on the NP-2T and
NP-2T16S-RS232 module low-speed ports.Table A-7 lists connector pinouts
for the DTE serial cable, CAB-OCT-232-MT. Table A-8 lists connector
pinouts for the DCE serial cable, CAB-OCT-232-FC.
Figure A-3 Low-Speed EIA/TIA-232 Compact Octal Serial Cable
J1-34
Shield
DSR/DTR
–
Twisted pair no. 11 <—
–
J2-20
Shield
DTR
–
J1-38
Shield
RXC/TXCE
–
Twisted pair no. 8 <—
–
J2-24
Shield
TXCE
–
60 Pin Signal Note
Directio
n 25 Pin Signal
EIA/TIA-232 connectors
H7381
Pin 60
Pin 161
Pin 200
Pin 1
Molex LFH 200-pin connector