Installation guide

5-10 Cisco 4000 Series Installation Guide
Additional Configuration Tasks
Table 5-1 ISDN BRI Switch Types
This completes the procedure to configure the global parameters.
Additional Configuration Tasks
When you have completed the setup facility, you might need to complete some additional
configuration tasks. See the following sections:
• Configuring the Ethernet Interface
• Configuring the T1 Interface
• Configuring the E1 Interface
• Configuring the ISDN BRI Interface
• Configuring the ATM Network Processor Module Interface
• Configuring the Synchronous Serial Interfaces
ISDN Switch Type Description
basic-1tr6 German 1TR6 ISDN switches
basic-5ess AT&T basic rate switches
basic-dms100 NT DMS-100 basic rate switches
basic-net3 NET3 ISDN switches (U. K. and others)
basic-ni1 National ISDN-1 switches
basic-nwnet3 Norwegian NET3 ISDN switches (phase 1)
basic-nznet3 New Zealand NET3 ISDN switches
basic-ts013 Australian TS013 switches
none Switch type not defined
ntt Japanese NTT ISDN switches
vn2 French VN2 ISDN switches
vn3 French VN3 ISDN switches