Specifications

Installation and Configuration
Performing Power On Self Test
17
Cisco 4400 Series Wireless LAN Controllers - Installation and Configuration Guide
78-17157-01
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting External Policy Interface: ok
Starting RFID Tag Tracking: ok
Starting Power Supply Status Monitoring Service: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: ok
Step 3 If this is the first time a Cisco Wireless LAN Controller has been powered up, or if you enter
Recover-Config in the User: prompt, the bootup script runs the Startup Wizard described in the Product
Guide, which prompts you for basic configuration inputs.
If this is at least the second time that you have powered up the controller, the bootup script prompts you
for a login and password. Enter the login and password as described in “Logging In,” or reset the
controller configuration to factory defaults by entering the following command to:
Recover-Config
In either of the last two cases, the Cisco Wireless LAN Controller has passed the POST test.