Specifications

Figure 1 depicts a sample TOE configuration, highlighting the physical boundary. The shaded

portions define the components in the physical boundary. The un-shaded portions define the

components supplied by the IT Environment.

Figure 1 Sample Deployment Topology

The following subsections describe the TOE components in detail.

2.3.1 Access Point (AP) TOE Component

The following Access Point models:

 Cisco Aironet 1131 AG Series Access Points

 Cisco Aironet 1142 AG Series Access Points

 Cisco Aironet 1242 AG Series Access Points

 Cisco Aironet 1252 AG Series Access Points

 Cisco Aironet 1262 AG Series Access Points

 Cisco Aironet 1520 AG Series Access Points

 Cisco Aironet 1552 Series Access Points

 Cisco Aironet 3500 AG Series Access Points

Hereafter referred to as Access Points or APs, the APs provides the connect ion point between

wireless client hosts and the wired network. Once authenticated as trusted nodes on the wired

infrastructure, the APs provide encryption service on the wireless network between

themselves and the wireless client. The APs also communicate directly with the Controller for

management purposes.

WLAN

Controller

MSE

(NMSP)

Syslog

(over TLS)

ACS or ISE

(RADIUS)

WCS or NCS

(SNMPv3)

Admin Host

(CLI over SSH,

or GUI over TLS)

LDAP

Access

Points

Wireless

Clients

Components included in the TOE

Components not included in the TOE

Management

Network

Controller models: WiSM2, WiSM, 5508, 4404, or 4402

AP models:

1131, 1142, 1242, 1252, 1262, 1522, 1524, 1552, 3500e or 3500i

Active