Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 56
802.11
Radio Standard
Minimum Available
Signal Strength (RSSI)
Maximum
"Mandatory" Data Rate
802.11b -75 dBm 1 Mb/s
-65 dBm
11 Mb/s
802.11g -67 dBm 6 Mb/s
-47 dBm 54 Mb/s
802.11a
-60 dBm
6 Mb/s
-45 dBm 54 Mb/s
Web Info: RF deployment
For additional details on RF deployment please see the Deploying Enterprise-Grade
Wi-Fi Telephony white paper and the Best Practices Guide to Network Design
Considerations for Spectralink Wireless Telephones.
Configuring 802.11n
1 In the navigation pane under 802.11 b/g/n, select High Throughput (802.11n). Check
the radio box to enable 11n mode and allow all data rates to be supported.
2 Disable msdu aggregation:
a Connect to the CLI as described in the section “Configuring a New Controller Starting
from Factory Defaults”.