Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 55
Screenshot for access points with internal antennas:
Screenshot for access points with external antennas:
4 In the navigation pane under 802.11b/g/n, click Network. Set network parameters as
follows:
a Set 802.11b/g Network Status to Disable. The radio will be re- enabled after setting
radio parameters.
Settings: Data rates
For setting up the Data Rates, please consult your facility’s RF site survey, designed
for voice traffic, to determine if you have sufficient coverage to support all data rates.
Spectralink Wireless Telephones require the following minimum dBm reading to
support the corresponding Mandatory data rate setting in the access point.