Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 54
3 Select Configure from the drop-down list for the access point you wish to change. Set
the parameters for that AP:
Settings: Power and channel settings
Global settings for RF Channel Assignment and Tx Power Level Assignment were
not tested. For Custom Tx Power and RF Channel settings please consult your
facility’s RF site survey — optimized for wireless voice traffic — to determine correct
power and channel settings for each AP using only channels
1
,
6
and
11
.
a Set Admin Status to Enable.
b Configure any other settings that might be relevant to your deployment as needed.
In version 7.0.220.0, select only one antenna for transmission when using 80xx
handsets. The CSD (cyclic shift diversity) algorithm has an incompatibility, which is
not present in the other releases.
c Click the Apply button to save all changes.