Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 46
Controller Setup
The initial setup of the controller is shown below.
Admin Tip: Example configuration
The setup instructions outlined in this document are for the configuration shown in the
diagram only. Your configuration may differ, and the appropriate adjustments must be
made.
1 From the main menu, click Controller.
2 Set the AP Multicast Mode to Multicast and enter a multicast IP address that is currently
not being used on your network for the Multicast Group Address.
3 Click the Apply button.
Cisco 6.0 versions:
Cisco 7.0 and 7.2 versions: