Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 41
Setting up the EDCA parameters profile
The EDCA parameters must be set to the WMM setting after the WLAN network QoS has been
set.
Configuration for handsets running in 802.11a mode mode in 8020/8030 handsets or 5 GHz in
84-Series handsets
1 In the navigation pane under 802.11a/n, select EDCA Parameters.
2 Ensure that WMM is selected from the drop-down list.
3 Click Apply.
Configuration for handsets running in 802.11b/g mode, 802.11b and b/g mixed mode, or 802.11 g
only mode in 8020/8030 handsets or 2.4 GHz in 84-Series handsets
1 In the navigation pane under 802.11b/g/n, select EDCA Parameters.
2 Ensure that WMM is selected from the drop-down list.
3 Click Apply.