Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 33
802.11a/n/ac AP’s
Admin Tip: 802.11ac
Spectralink has not yet been tested with 802.11ac clients in the network. It is known
that the handsets operate properly with 802.11ac turned off as shown.
2 Disable msdu aggregation:
a Connect to the CLI as described in the section “Configuring a New Controller Starting
from Factory Defaults”.
b Enter the commands:
config 802.11a 11nsupport a-msdu tx priority all disable
save config
3 If an 1142 ap is in use, disable mpdu aggregation.
a Connect to the CLI as described in the section “Configuring a New Controller Starting
from Factory Defaults”.
b Enter the commands:
config 802.11a 11nsupport a-mpdu tx priority all disable
save config