Specifications

VIEW Configuration Guide: Cisco WLAN Controllers (Virtual, Modules, and Standalone) with APs
1725-86192-000_AA.docx
August 2013 21
Configuration for handsets running in 802.11b, b/g mixed mode, g only mode in 8020/8030
handsets or 2.4 GHz in 84-Series handsets
Admin Tip: When to use g-only
When 8020/8030 handsets are set to g only mode, they support the higher g data
rates. In g only mode, however, the handset will not detect 802.11b clients and will
not provide protection. G only mode in these handsets should be used only if there is
no possibility of an 802.11b client or the network will experience data corruption.
1 From the main menu, click Wireless.
2 In the navigation pane, under Access Points click Radios, then select 802.11b/g/n. All
the APs that are connected should be listed, showing their Operational Status as UP.
Cisco 6.0 Version
Other Versions (for example)
3 Select Configure from the drop-down list for the access point you wish to change. Set
the parameters for that AP: