Installation guide

3-17
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Chapter 3 Switch Installation
Installing the Switch
Side-by-Side Mounting in a Rack or on a Wall
Figure 3-8 and Figure 3-9 are examples of recommended configurations where
the switches are rack- or wall-mounted side-by-side. Use the 1-meter and 3-meter
StackWise cables to connect the switches. These configuration provide redundant
connections.
Figure 3-8 Stacking up to Eight Switches in a Side-by-Side Mounting Configuration
Figure 3-9 Stacking Nine Switches in a Side-by-Side Mounting Configuration
Installing the Switch
This section describes these installation procedures:
• Rack Mounting, page 3-18
• Wall Mounting, page 3-32
• Table or Shelf Mounting, page 3-36
86825
90532