Installation guide

Chapter 1 Using Express Setup
Starting Express Setup
1-6
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Caution Do not connect the switch to any device other than the PC or workstation being
used to configure it.
Figure 1-5 Connecting the Switch and PC or Workstation Ethernet Ports
Step 5
Connect the other end of the cable to the Ethernet port on the PC or workstation.
Verify that the port status LEDs on both connected Ethernet ports are green.
Step 6 Wait approximately 30 seconds after the port LEDs turn green, and launch a web
browser on your PC or workstation.
Step 7 Enter the IP address 10.0.0.1, as shown in Figure 1-6, and press Enter.
1 Switch 3 PC or workstation
2 Ethernet cable
Catalyst 3750
SERIES
SYST
RPS
MASTR
STAT
DUPLX
SPEED
STACK
M
O
D
E
13X
14X
23X
24X
1X
2X
11X
12X
1
97174
2
3