Installation guide

1-3
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Chapter 1 Using Express Setup
Powering On the Switch
Figure 1-2 Ethernet Cable
Powering On the Switch
Complete these steps to power on the switch:
Step 1 Connect one end of the AC power cord to the power connector on the switch rear
panel, as shown in Figure 1-3.
Figure 1-3 Connecting the Power
89887
1 Switch 2 AC power cord
97176
1
2
RATING
100-240V ~
1.2A-0>6A, 50-60 HZ
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v @13A
CONSOLE
STACK 1
STACK 2