Installation guide

Chapter 1 Using Express Setup
Taking Out What You Need
1-2
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Caution Do not start Express Setup when there are any devices connected to the switch or
connect a switch that is already in Express Setup mode to any device other than
the PC or workstation that is being used to configure it. The switch acts as a DHCP
server during the Express Setup procedure, and only the PC or workstation
connected to the switch after Express Startup is started should receive a DHCP
address from the switch.
Taking Out What You Need
Remove the items shown in Figure 1-1 from the shipping container.
Figure 1-1 Catalyst 3750 Switch and AC Power Cord
You also need to provide an Ethernet (Category 5) straight-through cable (not
included), as shown in Figure 1-2, to connect the switch to your PC or
workstation.
1 Switch 2 AC power cord
1
2
97175
Catalyst 3750
SERIES
SYST
RPS
MASTR
STAT
DUPLX
SPEED
STACK
M
O
D
E
13X
14X
23X
24X
1X
2X
11X
12X