Installation guide

D-3
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Appendix D Quick Setup By Using the CLI-Based Setup Program
Methods for Accessing the CLI
Note While in Express Setup mode, the IP address 10.0.0.1 remains active on the
switch until you enter the write memory
command. You lose the Telnet
connection after entering the write memory command.
For more information about using the CLI, refer to the command reference for this
release.
Accessing the CLI Through the Console Port
You can access the CLI by connecting the console port of the switch to the serial
port on your PC or workstation and access the switch through a Telnet session. To
access the switch through the console port, follow the steps in the rest of this
chapter, beginning with the “Taking Out What You Need” section on page D-4.