Installation guide

D-1
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
APPENDIX
D
Quick Setup By Using the CLI-Based
Setup Program
This chapter provides a quick step-by-step installation and setup procedure for a
standalone switch or a switch stack.
Note For detailed installation procedures on rack-mounting your switch, stacking your
switches, or connecting to the small form-factor pluggable (SFP) modules, see
Chapter 3, “Switch Installation.” For product overview information, see
Chapter 2, “Product Overview.”
These steps describe how to do a simple installation:
1. Methods for Accessing the CLI, page D-2
2. Taking Out What You Need, page D-4
3. Stacking the Switches (Optional), page D-5
4. Connecting to the Console Port, page D-7
5. Starting the Terminal Emulation Software, page D-9
6. Connecting to a Power Source, page D-9
7. Entering the Initial Configuration Information, page D-10