Installation guide

Chapter 3 Switch Installation
Where to Go Next
3-50
Catalyst 3750 Switch Hardware Installation Guide
78-15136-02
Where to Go Next
If the default configuration is satisfactory, the switch does not need further
configuration. You can use any of these management options to change the
default configuration:
• Start CMS as described in the switch software configuration guide, and
configure the switch as a member of a cluster or as an individual switch.
• Use the CLI to configure the switch as a member of a cluster or as an
individual switch from the console. Refer to the Catalyst 3750 Switch
Command Reference on Cisco.com for information on using the CLI with a
Catalyst 3750 switch.
• Start an SNMP application such as the CiscoView application.