Installation guide

2-17

Catalyst 3750 Switch Hardware Installation Guide

OL-6336-01

Chapter 2 Switch Installation

Installing the Switch

Note Installing the switch in a 24-inch rack requires an optional bracket kit not included

with the switch. You can order a kit containing the 24-inch rack-mounting

brackets and hardware from Cisco. For the Catalyst 3750G-24TS switches, order

part number RCKMNT-3550-1.5RU=. For the other Catalyst 3750 switches, order

part number RCKMNT-1RU=.

Removing Screws from the Switch

If you plan to install the switch in a rack, you must first remove screws in the

switch chassis so that mounting brackets can be attached. Figure 2-9, Figure 2-10,

and Figure 2-11 show how to remove the chassis screws in a one-rack-unit (RU)

switch.

Figure 2-9 Removing Screws from the Catalyst 3750-24TS, 3750G-24T, 3750-24PS, 3750-48PS,

3750G-16TD, and 3750-48TS Switches

Catalyst 3750

SERIES

23X

24X

86819