Installation guide

Chapter 2 Switch Installation
Preparing for Installation
2-4
Catalyst 3750 Switch Hardware Installation Guide
OL-6336-01
Warning This equipment is intended to be grounded. Ensure that the host is connected to
earth ground during normal use. Statement 39
Warning Do not work on the system or connect or disconnect cables during periods of
lightning activity. Statement 1001
Warning Ultimate disposal of this product should be handled according to all national
laws and regulations. Statement 1040
Warning Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle.
Statement 100C
Warning Class 1 laser product. Statement 1008
Warning Avoid direct exposure to the laser beam. Statement 1012
Warning If a redundant power system (RPS) is not connected to the switch, install an RPS
connector cover on the back of the switch. Statement 265
Warning To comply with safety regulations, mount switches on a wall with the front
panel facing up. Statement 266
Warning Ethernet cables must be shielded when used in a central office environment.
Statement 171