Installation guide

2-59
Catalyst 3750 Switch Hardware Installation Guide
OL-6336-01
Chapter 2 Switch Installation
Where to Go Next
Where to Go Next
If the default configuration is satisfactory, the switch does not need further
configuration. You can use any of these management options to change the default
configuration:
• Start the device manager, which is in the switch memory, to manage
individual and standalone switches. This is an easy-to-use web interface that
offers quick configuration and monitoring. You can access the device
manager from anywhere in your network through a web browser. For more
information, see the device manager online help.
• Start the Network Assistant application, which is described in the Getting
Started with Cisco Network Assistant guide. Through this GUI, you can
configure and monitor a switch cluster or an individual switch.
• Use the CLI to configure the switch as a member of a cluster or as an
individual switch from the console. See the Catalyst 3750 Switch Command
Reference on Cisco.com for information on using the CLI with a
Catalyst 3750 switch.
• Start an SNMP application such as the CiscoView application.