Installation guide

2-45

Catalyst 3750 Switch Hardware Installation Guide

OL-6336-01

Chapter 2 Switch Installation

Installing and Removing XENPAK Modules

Figure 2-40 Removing the XENPAK Module Slot Cover

Step 4

Remove the XENPAK module from the protective packaging.

Step 5 Align the XENPAK module with the guide rails inside the module slot, and slide

the module into the opening until the back of the XENPAK faceplate is flush with

the switch faceplate. (See Figure 2-41.)

1 Phillips-head screw 2 Module slot cover

Catalyst 3750

series

104764