Specifications

Contents
iv
PA-MC-2T3+ Multi-Channel T3 Port Adapter Installation and Configuration
OL-3526-05
Identifying Interface Addresses 1-11
Cisco 7200 Series Routers Interface Addresses 1-12
Cisco 7301 Router Interface Addresses 1-12
Cisco 7304 PCI Port Adapter Carrier Card Interface Addresses 1-12
Cisco 7401ASR Router Interface Addresses 1-12
VIP Interface Addresses 1-13
CHAPTER 2 Preparing for Installation 2-1
Required Tools and Equipment 2-1
Software and Hardware Requirements 2-2
Checking Hardware and Software Compatibility 2-3
75-Ohm In-Line Coaxial Attenuator 2-3
Safety Guidelines 2-3
Safety Warnings 2-3
Electrical Equipment Guidelines 2-8
Preventing Electrostatic Discharge Damage 2-9
FCC Class A Compliance 2-9
CHAPTER 3 Removing and Installing Port Adapters 3-1
Handling Port Adapters 3-1
Online Insertion and Removal 3-2
Warnings and Cautions 3-3
Port Adapter Removal and Installation 3-4
Cisco 7200 Series—Removing and Installing a Port Adapter 3-5
Cisco 7200 VXR Routers Port Adapter Jacket Card 3-6
Cisco 7301 Router—Removing and Installing a Port Adapter 3-8
Cisco 7304 PCI Port Adapter Carrier Card—Removing and Installing a Port Adapter 3-9
Cisco 7401ASR Router—Removing and Installing a Port Adapter 3-11
VIP—Removing and Installing a Port Adapter 3-12
Cables and Connectors 3-13
Connecting the Cables 3-13
CHAPTER 4 Configuring Unchannelized mode for the Cisco PA-MC-2T3+ 4-1
Using the EXEC Command Interpreter 4-1
Replacing an Existing Port Adapter 4-2
Shutting Down the T3 Controller 4-2
Configuring an Unchannelized T3 Link 4-3
Configuring the T3 Controller 4-4