Installation guide

Chapter 2 Installing and Starting Up the Switch
Where to Go Next
2-30
Catalyst 3500 Series XL Hardware Installation Guide
78-6456-03
Where to Go Next
If the default configuration shown in Table 2-1 is satisfactory, the switch does not
need further configuration. You can use any of the following management options
to change the default configuration:
• Start the Cluster Management Suite, as described in the Cisco IOS Desktop
Switching Software Configuration Guide, and configure the switch as a
member of a cluster or as an individual switch. Refer to the release notes on
CCO for the most current browser requirements.
• Use the CLI to configure the switch from the console. See Cisco IOS Desktop
Switching Command Reference for information on using the CLI with
Catalyst 3500 XL switches.
• Start an SNMP application such as the CiscoView application.
Diagnostics
SPAN
5
port monitoring Disabled.
Console, buffer, and file logging Disabled.
Security
Password None.
Addressing security Disabled.
Trap manager 0.0.0.0
Community strings public.
Port security Disabled.
Inline Power
Inline power mode Auto.
1. CDP = Cisco Discovery Protocol
2. ARP = Address Resolution Protocol
3. VLAN = Virtual Local Area Network
4. CGMP = Cisco Group Management Protocol
5. SPAN = Switched Port Analyzer
Table 2-1 Default Configuration Settings (continued)
Feature Default Setting