Installation guide

Chapter 2 Installing and Starting Up the Switch
Preparing for Installation
2-6
Catalyst 3500 Series XL Hardware Installation Guide
78-6456-03
Verifying Package Contents
Note Carefully remove the contents from the shipping container, and
check each item for damage. If any item is missing or damaged,
contact your Cisco representative or reseller for support. Return all
packing materials to the shipping container, and save it.
The switch is shipped with the following items:
• Quick Start: Catalyst 3500 Series XL Cabling and Setup
• This Catalyst 3500 Series XL Hardware Installation Guide
• Cisco IOS Desktop Switching Software Configuration Guide
• Release Notes for the Catalyst 2900 Series XL and Catalyst 3500 Series XL
Cisco IOS Release 12.0(5)XU
• Cisco Documentation CD-ROM
• AC power cord
• Mounting kit containing:
– Four rubber feet for mounting the switch on a table
– Two mounting brackets
– Four Phillips flat-head screws for attaching the brackets to the switch
– Four Phillips truss-head screws for attaching the brackets to the switch
– Four Phillips machine screws for attaching the brackets to a rack
– One cable guide and one black Phillips machine screw for attaching the
cable guide to one of the mounting brackets
• One RJ-45-to-RJ-45 rollover cable
• One RJ-45-to-DB-9 female adapter
• Cisco Information Packet, containing warranty, safety, and support
information