Installation guide

Front-Panel Description
Catalyst 3500 Series XL Installation Guide
1-14
LED modes provide the following information:
See Table 1-5 for a description of the LED colors and their meanings for the different
modes.
Changing the Port Mode
To change the port mode, press the Mode button (see Figure 1-9) to highlight in sequence
each of the possibilities. Release the button to enable the highlighted function.
Note To change the port mode in the Catalyst 3548 XL switch, press the Mode label.
Figure 1-9 Changing the Port Mode
STATUS
The port status. This is the default mode.
UTL
The current bandwidth in use by the switch.
DUPLEX
The port duplex mode: full duplex or half duplex.
SPEED
The port operating speed: 10, 100, or 1000 Mbps.
SYSTEM
RPS
STATUS
MODE
UTIL
2
3
1
DUPLX
SPEED
18962
Mode button