Specifications

Using the Operation Panel 2-79

HTTPS (SSL Server HTTPS setting)

HTTPS (HyperText Transfer Protocol Secure) is a protocol that adds

SSL data encryption, message authentication and a digital signature

function to the HTTP protocol used for data transfer between WWW

servers and clients.

S-HTTP is a similar protocol, but HTTPS differs in that it uses SSL.

The default setting is On.

1 Press Z while >SSL Server On > is displayed. >>HTTPS appears.

2 Press [OK]. A blinking question mark (?) appears.

3 Select On or Off using U or V.

4 Press [OK].

5 Press [MENU]. The display returns to Ready.

IPSec (IPSec setting)

IPSec (IP Security Protocol) is a security protocol adopted as the

standard by the IETF for authentication and encryption in the third

network layer (IP layer).

It can be used with both IPv4 and IPv6.

The default setting is Off.

1 After entering the administrator ID and password, press U or V

repeatedly until >IPSec appears.

2 Press [OK]. A blinking question mark (?) appears.

3 Select On or Off using U or V.

4 Press [OK].

5 Press [Menu]. The display returns to Ready.

>>HTTPS

? On

Note IPv4 uses 32-bit IP addresses and IPv6 uses 128-bit IP

addresses.

Note Check with your network administrator when selecting

network settings.

>IPSec

? Off