Specifications

2-72 Using the Operation Panel
Off/On (Setting toner addition notifications)
Select whether Toner Alert Level is enabled.
1 After entering the administrator ID and password, press U or V
repeatedly until >>Off/On appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
TonerAlert Level (Setting for the alert level for toner addition)
This sets the level at which toner addition alerts will be displayed.
1 After entering the administrator ID and password, press U or V
repeatedly until >>TonerAlert Level appears.
2 Press [OK]. A blinking cursor (_) appears.
3 Press U or V to increase or decrease the value at the blinking cursor
and set the level at which an alert will be displayed. The setting is
possible between 005 and 100%. Use Y and Z to move the cursor
right and left.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
>>Off/On
? Off
>>TonerAlert Level
005
%