Specifications

Using the Operation Panel 2-57
3 Press [OK]. The Date settings screen appears.
Date (date setting)
1 After entering the administrator ID and password, press U or V
repeatedly until >>Date (Year/Mon/Day) appears.
2 Press [OK]. A blinking cursor (_) appears.
3 Use the arrow keys to set the year, month, and day. Press U or V to
increase or decrease, respectively, the value at the blinking cursor.
Use Y and Z to move the cursor right and left.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Time (time setting)
1 After entering the administrator ID and password, press U or V
repeatedly until >>Time (Hour:Min:Sec) appears.
2 Press [OK]. A blinking cursor (_) appears.
3 Use the arrow keys to set the hour, minute, and second. Press U or
V to increase or decrease, respectively, the value at the blinking
cursor. Use Y and Z to move the cursor right and left.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Date Format (date format selection)
One of three formats can be selected for the date format.
1 After entering the administrator ID and password, press U or V
repeatedly until >>Date Format appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Press U or V to select Date Format. The following date formats
can be selected:
Month/Day/Year
Day/Month/Year
Year/Month/Day
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
>>Date (Year/Mon/Day)
2
013 / 01 / 01
Note The order in which the year, month, and day appear varies
depending on the Date Format (date format selection) on
page 2-57.
>>Time (Hour:Min:Sec)
1
1 : 19 : 21
>>Date Format
? Month/Day/Year