User Manual

9-17

Cisco TelePresence System 3200

OL-14521-01

Chapter 9 Routing Power and Signal Cables

Power Requirements for the Cisco TelePresence 3200

Step 14

Attach the ferrite cores to the ends of all six camera cables (both the video and Ethernet cables, 12 ferrite

cores total).

Wrap the cables around the ferrite as shown in Figure 9-14. Attach the ferrites so that they are

approximately 1 1/2 inches (4 cm) from the connectors.

Figure 9-14 Connecting the Ferrite Cores

206364