Specifications

2-67
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Chapter 2 Message and Recovery Procedures
SWITCH_QOS_TB Messages
Error Message SW_VLAN-6-VTP_MODE_CHANGE: VLAN manager changing device mode from
[chars] to [chars].
Explanation
An automatic VTP mode device change occurred upon receipt of a VLAN configuration
database message containing more than a set number of VLANs. The first [chars] is the previous
mode, and the second [chars] is the current mode.
Recommended Action No action is required.
SWITCH_QOS_TB Messages
This section contains the QoS trusted boundary (TB) messages.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_DETECTED: [chars] detected on port
[chars], port trust enabled.
Explanation
The trusted boundary software detected a device matching the trusted device setting for
the port and has modified the port trust state. The first [chars] is the type of device detected, and the
second [chars] is the port ID.
Recommended Action No action is required.
Error Message SWITCH_QOS_TB-5-TRUST_DEVICE_LOST: [chars] no longer detected on port
[chars], port set to untrusted.
Explanation The trusted boundary software lost contact with a trusted device and has set the port
trust state to untrusted. The first [chars] is the type of device detected, and the second [chars] is the
port ID.
Recommended Action No action is required.
TCAMMGR Messages
This section contains the ternary content-addressable memory manager (TCAMMGR) messages.
Error Message TCAMMGR-3-GROW_ERROR: cam region [dec] can not grow.
Explanation
The specified CAM region is configured as a static region with a fixed number of
entries, and a caller requested to add more CAM entries. [dec] is the CAM region.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 1-2.