Specifications

2-61
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Chapter 2 Message and Recovery Procedures
SW_MACAUTH Messages
SW_MACAUTH Messages
This section contains the MAC address authentication messages.
Error Message SW_MACAUTH-4-UNAUTH_MAC: Unauthenticated MAC [enet] on port [chars]
Explanation The switch has received an unauthenticated MAC address on the specified port. [enet]
is the unauthenticated MAC address, and [chars] is the port.
Recommended Action No action is required.
Error Message SW_MACAUTH-5-CLEAR_TABLE: MAC Authentication Table Cleared
Explanation
The MAC authentication table was cleared.
Recommended Action No action is required.
Error Message SW_MACAUTH-5-MACAUTH_ENADSA: MAC Authentication [chars]
Explanation
MAC authentication is enabled or disabled. [chars] is the MAC authentication status,
either enabled or disabled.
Recommended Action No action is required.
Error Message SW_MACAUTH-5-MAC_AUTHENTICATED: MAC [enet] was authenticated
Explanation The switch has received a command to authenticate a MAC address. [enet] is the MAC
address.
Recommended Action No action is required.
SW_VLAN Messages
This section contains the VLAN manager messages. The VLAN manager receives information from the
VTP and enables the proper VLAN membership on all interfaces through the port manager.
Error Message SW_VLAN-3-VLAN_PM_NOTIFICATION_FAILURE: VLAN Manager synchronization
failure with Port Manager over [chars].
Explanation
The VLAN manager dropped a notification from the port manager because of a lack of
ready pool space. [chars] is the type of port manager notification.
Recommended Action Copy the message exactly as it appears on the console or in the system log.
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or