Specifications

vii
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Preface
Audience
This guide is for the networking professional managing the Cisco Catalyst Blade Switch 3040 for FSC,
hereafter referred to as the switch. Before using this guide, you should have experience working with the
Cisco IOS software and the switch software features.
Note The Cisco Catalyst Blade Switch 3040 for FSC is referred to as the blade switch in the software
documentation for the Fujitsu Siemens Computers (FSC) PRIMERGY BX600 S2 blade server (also
referred to as the BX600 system in the blade switch hardware documentation).
Purpose
This guide describes only the Cisco Catalyst Blade Switch 3040-specific system messages that you
might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software
System Error Messages, Cisco IOS Release 12.2.
This guide does not describe how to install your switch or how to configure software features on your
switch. It also does not provide detailed information about commands that have been created or changed
for use by the switch. For hardware installation information, see the hardware installation guide that
shipped with your switch. For software information, see the software configuration guide and the
command reference for this release.
For documentation updates, see the release notes for this release.
Conventions
This publication uses these conventions to convey instructions and information:
Command descriptions use these conventions:
• Commands and keywords are in boldface text.
• Arguments for which you supply values are in italic.
• Square brackets ([ ]) mean optional elements.