Specifications

2-43
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Chapter 2 Message and Recovery Procedures
PORT_SECURITY Messages
Error Message PM-4-VMPS_CFG: Dynamic access VLAN [dec] same as voice vlan on [chars].
Explanation
The access VLAN ID on the VMPS server is the same as the voice VLAN ID on the
interface. [dec] is the access VLAN ID, and [chars] is the physical interface.
Recommended Action Assign the access VLAN on the VMPS server to a VLAN ID that is different
from the voice VLAN ID.
PORT_SECURITY Messages
This section contains the port security messages.
Error Message PORT_SECURITY-2-PSECURE_VIOLATION:Security violation occurred caused
by MAC [enet] on port [chars].
Explanation An unauthorized device attempted to connect on a secure port. MAC [enet] is the MAC
address of the unauthorized device, and port [chars] is the secure port.
Recommended Action Identify the device that attempted to connect on the secure port. Notify your
network system administrator of this condition.
Error Message PORT_SECURITY-6-ADDR_REMOVED: Address [dec]:[enet] exists on port
[chars]. It has been removed from port [chars].
Explanation
A routed port is reconfigured as a switch port. The address in the previous switch
configuration conflicts with the information in the running configuration and has been deleted.
[dec]:[enet] is the MAC address of the port. [chars] is the reconfigured port.
Recommended Action No action is required.
Error Message PORT_SECURITY-6-ADDRESSES_REMOVED: Maximum system secure address count
reached. Some secure addresses configured on port [chars] removed.
Explanation
Some configured and sticky MAC addresses on the specified port were removed from
the configuration. The number of secure addresses that the system supports was exceeded. This
condition occurs only during hot swapping or port-mode changes (for example, when the port is
converted from a Layer 3 to a Layer 2 port). [chars] is the port.
Recommended Action No action is required.
Error Message PORT_SECURITY-6-VLAN_FULL: Vlan [dec] on port [chars] has reached its
limit. Address [enet] has been removed.
Explanation The voice VLAN is the same as the access VLAN, and the maximum number of MAC
addresses reached the maximum limit allowed on the access VLAN. The address is deleted. [dec] is
the VLAN ID, [chars] is the port assigned to the voice VLAN and the access VLAN, and [enet] is
the MAC address that is deleted.
Recommended Action No action is required.