Specifications

2-30
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Chapter 2 Message and Recovery Procedures
IP_DEVICE_TRACKING_HA Messages
Error Message IGMP_QUERIER-4-SNOOPING_DISABLED: The IGMP querier is operationally
disabled in VLAN [dec] because IGMP snooping has been disabled in this VLAN.
Explanation
IGMP snooping is disabled on this VLAN. Do not enable the IGMP querier when IGMP
snooping is disabled. [dec] is the VLAN IDs.
Recommended Action Confirm that IGMP snooping is enabled both globally and on the VLAN.
Error Message IGMP_QUERIER-6-PIM_DISABLED: The IGMP querier is now operationally
enabled in VLAN [dec] because PIM is no longer enabled on the SVI.
Explanation
Protocol-Independent Multicast (PIM) is disabled on the switch virtual interface (SVI),
and the IGMP querier function is now enabled. [dec] is the VLAN ID.
Recommended Action No action is required.
Error Message IGMP_QUERIER-6-SNOOPING_ENABLED: The IGMP querier is now operationally
enabled in VLAN [dec] because IGMP snooping is no longer disabled.
Explanation
IGMP snooping was enabled. As a result, the IGMP querier function is now enabled.
[dec] is the VLAN ID.
Recommended Action No action is required.
IP_DEVICE_TRACKING_HA Messages
This section contains the IP Device Tracking High Availability (HA) message.
Error Message IP_DEVICE_TRACKING_HA-4-ENTRY_OUT_OF_SYNC: Host mac-address [enet]
ip-address [IP_address] interface [chars]
Explanation
The IP device tracking table has detected an inconsistency between active and standby
for this host. [enet] is the host MAC address, [IP_address] is the host IP address, and [chars] is the
interface.
Recommended Action No action is required.