Specifications

2-6
Cisco Catalyst Blade Switch 3040 for FSC System Message Guide
OL-10697-01
Chapter 2 Message and Recovery Procedures
BACKUP_INTERFACE Messages
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the “Error
Message Traceback Reports” section on page 1-2.
Error Message ACLMGR-3-UNLOADING: Unloading [chars] label [dec] feature.
Explanation
The ACL manager was unable to fit the complete configuration into the hardware, so
some features will be applied in software. This prevents some or all of the packets in a VLAN from
being forwarded in hardware and requires them to be forwarded by the CPU. Multicast packets
might be dropped entirely instead of being forwarded. [chars] is the direction (input or output), and
[dec] is the label number.
Recommended Action Use a simpler configuration. Use the same ACLs on multiple interfaces, if
possible.
BACKUP_INTERFACE Messages
This section contains the Flex Link message.
Error Message BACKUP_INTERFACE-5-PREEMPT: Preempting interface [chars] in backup
pair ([chars], [chars]), preemption mode is [chars]
Explanation
The switch is pre-empting the current forwarding interface in the backup interface pair.
The first [chars] is the number of the current forwarding interface. The second and third [chars] are
the names of the interfaces in the backup pair, and the fourth [chars] is the pre-emption mode.
Recommended Action No action is required.
BSPATCH Messages
This section contains boot loader patch messages.
Error Message BSPATCH-1-RELOAD: System will reboot to activate newly patched Boot
Loader.
Explanation
The switch will automatically reboot after the boot loader is patched.
Recommended Action If this message recurs, copy it exactly as it appears on the console or in the
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
“Error Message Traceback Reports” section on page 1-2.